For more info visit http://www.GreenFuelH2O.com
+++++++++++++++++++++++++++++++++++++++
A look at my new management system handling 21 LPM
Duration : 0:4:5
HHO-gas/20-lpm-hydrogen-generator-hho-managment-system#more-354″ class=”more-link”>Read the rest of this entry »
Gunning for greater than 1LPM at less than 250W
Duration : 0:9:53
HHO/44-test-data-with-rebuilt-hho-zero-cell#more-353″ class=”more-link”>Read the rest of this entry »
Please visit my web site http://alt-nrg.org/ for all the latest OU news.
Demo of the working pump.
Duration : 0:6:48
HHO-energy/52-working-hho-vacuum-pump#more-332″ class=”more-link”>Read the rest of this entry »
Chevrolet 2006 HHR Water For Fuel - HHO Gas Part 2
I am a perfectionist in doing things right the first time. During the demonstration I try to perform the demonstration as if everyone is watching the video was doing it themselves along with me. During my video I try to do things to prevent skepticism. Before I put this welding machine on a trial run on my vehicle I will be using scientific equipment to make sure that there is no sodium hydroxide passing through the tube on a regular basis into the engine. During the demonstration there was a 20 foot hose running from the welding machine to the flashback arrestor an additional 15 foot from the arrestor to the automobile. The flashback arrestor at that moment of time was acting as a fluid separator only allowing the HHO Gas pass through it. In addition I will be checking with the Chevrolet dealership electrical department to make sure that the alternator is putting out enough energy to run my electric inverter taking the power from DC to AC to run the welding device. If we cannot run the inverter to the welding machine that we will have to bypass the AC power supply on the welding machine and go into the DC portion of the machine to perform the same functions as if it was plugged into the AC. Before we do that we would try this simple way first using our inverter to simplify the installation.
Duration : 0:7:49
Preview of my compressor/vacuum pump for measurement of HHO production under vacuum.
Duration : 0:4:35
Please visit my web site http://alt-nrg.org/ for all the latest OU news.
2nd time was the charm putting this stack of plates together. Here is the finished plate cavity.
Duration : 0:5:35
HHO/39-new-experimental-hho-cell-completed-plate-embly#more-270″ class=”more-link”>Read the rest of this entry »
Please visit my web site http://alt-nrg.org/ for all the latest OU news.
Universal HHO injection method discussed using home brew venturi in air intake.
Duration : 0:5:35
Please visit my web site http://alt-nrg.org/ for all the latest OU news.
Just got 1.76LPM after another highway run. 13.19V, 29amps, 382W, 4.61 ml/min/watt. 178*F operating temp. Video going up shortly.
When stone cold this morning (about 40*F) it only drew 11 amps at 13.5V. Conductivity rises quickly with temp. Volts drop in later measurements because higher current creates more voltage drop in wires to the cell. Heavier gauge wire would have made the amp rise even more dramatic!
Duration : 0:7:14
HHO/48-another-new-record-176-lpm-hho-at-382w-461mmw-eff#more-166″ class=”more-link”>Read the rest of this entry »
Parts are coming together.
Please visit my web site http://alt-nrg.org/ for all the latest OU news.