This is an update on my Brick Cell Hydrogen Generator.
Duration : 0:3:37
HHO-gas/video-41-new-brick-cell-hydrogen-generator-hho-browns-gas-hydroxy#more-362″ class=”more-link”>Read the rest of this entry »
(Video 41) New Brick Cell Hydrogen Generator (HHO, Brown’s Gas, Hydroxy)
20 LPM hydrogen generator HHO managment system
For more info visit http://www.GreenFuelH2O.com
+++++++++++++++++++++++++++++++++++++++
A look at my new management system handling 21 LPM
Duration : 0:4:5
HHO-gas/20-lpm-hydrogen-generator-hho-managment-system#more-354″ class=”more-link”>Read the rest of this entry »
#44 Test data with rebuilt HHO zero-cell
Gunning for greater than 1LPM at less than 250W
Duration : 0:9:53
HHO/44-test-data-with-rebuilt-hho-zero-cell#more-353″ class=”more-link”>Read the rest of this entry »
(Video 44) Simple HHO Gas Filter (HHO, Brown’s Gas, Hydroxy)
This is a video showing my HHO Gas Filter that is a variation of jdcmusicman’s design. It is intended to remove any impurities from the exhausted gas of HHO fuel cells.
All of the parts were very inexpensive and can be purchased from just about any home improvement store.
Duration : 0:1:28
HHO-gas-filter-hho-browns-gas-hydroxy#more-351″ class=”more-link”>Read the rest of this entry »
http://www.hybridwaterpower.com. This is an original demo unit we used when we first started developing and testing on-demand hydrogen generation systems. It uses SS drains and creates incredible convection currents along with a decent gas production.#52 Working HHO vacuum pump!
Please visit my web site http://alt-nrg.org/ for all the latest OU news.
Demo of the working pump.
Duration : 0:6:48
HHO-energy/52-working-hho-vacuum-pump#more-332″ class=”more-link”>Read the rest of this entry »
Chevrolet 2006 HHR Water For Fuel - HHO Gas Part 2
Chevrolet 2006 HHR Water For Fuel - HHO Gas Part 2
I am a perfectionist in doing things right the first time. During the demonstration I try to perform the demonstration as if everyone is watching the video was doing it themselves along with me. During my video I try to do things to prevent skepticism. Before I put this welding machine on a trial run on my vehicle I will be using scientific equipment to make sure that there is no sodium hydroxide passing through the tube on a regular basis into the engine. During the demonstration there was a 20 foot hose running from the welding machine to the flashback arrestor an additional 15 foot from the arrestor to the automobile. The flashback arrestor at that moment of time was acting as a fluid separator only allowing the HHO Gas pass through it. In addition I will be checking with the Chevrolet dealership electrical department to make sure that the alternator is putting out enough energy to run my electric inverter taking the power from DC to AC to run the welding device. If we cannot run the inverter to the welding machine that we will have to bypass the AC power supply on the welding machine and go into the DC portion of the machine to perform the same functions as if it was plugged into the AC. Before we do that we would try this simple way first using our inverter to simplify the installation.
Duration : 0:7:49
Results of todays gas generation experiments and the questions it has raised.(Video 40) Hydrogen Generator Blade Cell Design (HHO, Brown’s Gas, Hydroxy)
This is a quick video to demonstrate my Blade Cell Hydrogen Generator.
It is basically a mini-me sized smack cell, with a few alterations.
I’m still refining the design to get better output and keep heat to a minimum.
Duration : 0:3:51
HHO-gas/video-40-hydrogen-generator-blade-cell-design-hho-browns-gas-hydroxy#more-312″ class=”more-link”>Read the rest of this entry »
HHO Dry Cell Installed In 89 Ford Mustang #6
I have been working on a Dry Cell or SSC (Sealed Series Cell) design for a YEAR now for my mustang. I finally came up with a design that meet and exceeds my design criteria. 1) It has to be capable of 2 Litter per minute or better of production. 2) Draw less than 25 amps while producing 2 Litter per minute. By using two individual cell sandwiched together with the magnetic fields aligned, a spacing of 3/32, and a High electrolyte concentration I was able to meet my goals.
The cell has 14 plates total. They are 6 x 6 inches. The cell draws 35 amps straight DC but is current limited with a constant current PWM set at 21 Amps. The cell reaches a maximum of 110 Deg on a hot day. I am using a digital EFIE set at 0.22 volts added. I do not have any modifications to the MAP sensor. The MAP sensor is frequency based and I can not find a MAP enhancer for my specific application. The Fuel Pre-Heater is still installed and working fine.
I am currently getting 43 MPG Highway. My stock MPG is 28-29 before HHO . The Modification have raised my Fuel Efficiency by 53%. The car drives and runs just like it were stock with the exception that I am not saving money and not producing any pollution as shown at the end of the video.
I know this Technology to be Fact and I Demonstrate that HHO WORK every time I dive my car.
Skeptics, don’t bother posting a comment because you comments will just be removed and you will be blocked.
Duration : 0:6:21
HHO-technology/hho-dry-cell-installed-in-89-ford-mustang-6#more-305″ class=”more-link”>Read the rest of this entry »