this is a 3 clamshell design all powered by one 12v car battery. we are pulling 30 amps and had a consistant run of L/min with this setup. enjoy
Duration : 0:2:57
HHO/waterfuel-hho-torch-sirhoax-clamshell#more-370″ class=”more-link”>Read the rest of this entry »
For more info visit http://www.GreenFuelH2O.com
+++++++++++++++++++++++++++++++++++++++
A look at my new management system handling 21 LPM
Duration : 0:4:5
HHO-gas/20-lpm-hydrogen-generator-hho-managment-system#more-354″ class=”more-link”>Read the rest of this entry »
Chevrolet 2006 HHR Water For Fuel - HHO Gas Part 2
I am a perfectionist in doing things right the first time. During the demonstration I try to perform the demonstration as if everyone is watching the video was doing it themselves along with me. During my video I try to do things to prevent skepticism. Before I put this welding machine on a trial run on my vehicle I will be using scientific equipment to make sure that there is no sodium hydroxide passing through the tube on a regular basis into the engine. During the demonstration there was a 20 foot hose running from the welding machine to the flashback arrestor an additional 15 foot from the arrestor to the automobile. The flashback arrestor at that moment of time was acting as a fluid separator only allowing the HHO Gas pass through it. In addition I will be checking with the Chevrolet dealership electrical department to make sure that the alternator is putting out enough energy to run my electric inverter taking the power from DC to AC to run the welding device. If we cannot run the inverter to the welding machine that we will have to bypass the AC power supply on the welding machine and go into the DC portion of the machine to perform the same functions as if it was plugged into the AC. Before we do that we would try this simple way first using our inverter to simplify the installation.
Duration : 0:7:49
Atomic hydrogen welding torch using the HHO Gas output from a series electrolyzer. This torch can melt steel, vaporize glass, and even melt through granite, even though its flame is only a few millimeters across!
Duration : 0:8:3
HHO/hydrogen-microtorch-hho-welding-torch#more-311″ class=”more-link”>Read the rest of this entry »
My company HybridTech Energy was on KLFY TV 10 in Lafayette, LA.
NOTE: I am not the INVENTOR of this technology, however my team and I have DEVELOPED the technology far beyond anything you will find for sale today, anywhere.
Working with the scientists in the Electrical and Chemical Engineering laboratory at the local university, we are DEVELOPING ways to make this technology more efficient. I don’t “open source” my information.
Duration : 0:2:6
HHO-technology/hybridtech-on-cbs-news-in-lafayette-hho-gas-diesel-truck#more-244″ class=”more-link”>Read the rest of this entry »
D3 and SmartScarecrow join up to work on the small engine project. But you just know they will make some time to play with the HHO torch!
Duration : 0:1:59
Chevrolet 2006 HHR Water For Fuel - HHO Gas Part 1
I am a perfectionist in doing things right the first time. During the demonstration I try to perform the demonstration as if everyone is watching the video was doing it themselves along with me. During my video I try to do things to prevent skepticism. Before I put this welding machine on a trial run on my vehicle I will be using scientific equipment to make sure that there is no sodium hydroxide passing through the tube on a regular basis into the engine. During the demonstration there was a 20 foot hose running from the welding machine to the flashback arrestor an additional 15 foot from the arrestor to the automobile. The flashback arrestor at that moment of time was acting as a fluid separator only allowing the HHO gas pass through it. In addition I will be checking with the Chevrolet dealership electrical department to make sure that the alternator is putting out enough energy to run my electric inverter taking the power from DC to AC to run the welding device. If we cannot run the inverter to the welding machine that we will have to bypass the AC power supply on the welding machine and go into the DC portion of the machine to perform the same functions as if it was plugged into the AC. Before we do that we would try this simple way first using our inverter to simplify the installation.
Duration : 0:10:17
This is my latest creation. A 12 volt portable HHO torch made with an 8 inch EBN dry cell.
Duration : 0:7:5
ionized path/spark gap/plasma torch
Melting Glass, Granite, and Steel with